Installing the sensor

This document describes how to install your sensor. You will find a detailed step-by-step process to help you starting using the sensor.

Step 1 - Downloading the pairing App

The initial pairing of a sensor is performed through the pairing App. You can get the App here.

Thibaud will add soon the link to download the pairing App.

Step 2 - Creating your personnal account

You can create you account directly in the application. You will receive your unique user identity, which will be used to make your sensor only yours. Read the section Creating a Unique User ID to get all the informations related to your user identity.

Thibaud will describe how to create a personnal account using the pairing App.

Step 3 - Pairing your sensor

You are now ready to start the initial pairing or your sensor.


The pairing process will work only if the sensor is connected to power. During the initial pairing phase, the LED remains blue.

Thibaud will describe how to pair an Ambient 16 using the pairing App.

Step 4 - Placing the sensor in your home

Thibaud will describe how to install a sensor in different places of a house.

Step 5 - Starting again using a Factory reset

By performing a factory reset, your Ambient 16 will return in the same state as it was when you first took it out of the box. The ownership will be reset. This means that you will need to pair the Ambient 16 again with our App. All data that have been stored on our cloud will be kept.

Insert a pin or the branch of a paper clip in the pinhole one the back for more than 5 seconds. This operation must be done while the device is powered. The Ambient 16 will restart with its original code. You should then update its software from our App.


A factory reset can also be performed from our App, or using the command Factory reset.